-11-
-12-
3.
【
WEARING/REMOVE HEARING
AID】
4.
【
TURN ON/TURN OFF
】
The in ear detection sensor will carry out real-time intelligent
detection on the operation status of the hearing aid. When the
hearing aid is removed, it will automatically enter the standby
status; When you place the hearing aid in the ear, it will
automatically turn on.
3.1 Wearing hearing aid
Step 1: Hold the hearing aid body (hard
part), place in the ear (Make sure it is in
right direction like picture).
Step 2: Move the body slightly into auricle
for holding until feeling comfortable.
3.2 Removing the hearing aid
Step 1: Grasp the protruding
hearing aid and remove it
from your auricle
Notice:
1.It may be in few circumstances that the ear dome remain
attached to the auditory meatus after the hearing aid is taken
out improperly In that case, please ask a professional doctor
to take the ear dome out.
2.The creak sound can be used as a reference to determine
whether the hearing aid is secured. If the hearing aid gives
out squeaking, please check if it is taken on correctly; if so,
but the squeaking remains, please replace with the other set
of ear dome. When the hearing aid is not in use, please turn
it off without delay.
3.When the hearing aid is not functioning properly, please
check the “Troubleshooting Guide”. If none of the solutions
work, please contact our after-sales service team.
Turn On: Take the hearing aid out of the charging case, the
hearing aid will enter the standby status. The hearing aid will
turn on automatically in 3 seconds when you wear the hearing
aid correctly in the ears.
Turn Off: The hearing aids will automatically enter the standby
status when you remove it from your ear. Put the hearing aids
back into the correct slot of the charging case , they will
automatically turn off and start charging.