Jingda JS1061B, Руководство по эксплуатации

Страница: 7 / 12

6
6
illustrated as JS-1061B Overall figure, the part of transferring ink
⑥
and
⑩
are glue roller with the functions of transferring ink, its pressure is
4-5mm, if it is no need to work, take them out, because of long time of
pressure, it will cause out of shape.
Duct illustrated as following:
The part of duct is a very precise part of the machine, the blade
①
is
fixed on the lean steel plate by screws
②
and bar
③
. The adjusting
screw
⑤
is used for adjusting the gap between the blades, as well as
control the ink volume and evenness. Oil hole
⑤
is used for adding the
lubricating oil to lubricate duct and shaft. A new machine must be added
with oil. If it needs to rinse the oil, turn the adjusting screw up to the
trough, and then pull it out. When wanting to replace it, please be careful
and steady.