1
1.Introduction
1.1 Purpose
This document provides detailed instructions and valuable safety information regarding the installation,
electrical connection and maintenance of JINERGY Double Glass Photovoltaic modules (JINNENG modules),
involved module model are JNHM60-XXX and JNHM72-XXX.
All instructions and mechanical and electrical requirements should be read and understood before attempting
installation.
The installer should conform to all safety precautions in this guide when installing the module. Keep this guide
in a safe place for further reference.
1.2 Limitation of Liability
Because the conditions and methods of installation, operation, use and maintenance of photovoltaic (PV)
products referring to the use of manual are beyond JINERGY control, JINERGY does not undertake any related
responsibility, and expressly disclaims liability for loss, damage, or expense increasing arising out of or in any way
connected with such installation, operation, use or maintenance. JINERGY reserves the right to change the manual
without prior notice.
1.3 Others
Modules rated for use in this application class may be used in systems operating at greater than 50V DC
or 240W, where general contact access is anticipated. Modules qualified for safety through IEC 61730 -1 and
this part of IEC 61730 within this application class are considered to meet the requirements for safety class
II.
2.Safety
2.1 General Safety
2.1.1
Consult and follow local codes and other applicable laws concerning required permitting as well as installation
& inspection requirements, rules, and regulations.
2.1.2
PV modules should be installed and maintained by qualified personnel.
2.1.3
Use the same performance modules within a given series.
2.1.4
Follow all safety precautions of all components used in the system.
