It means for every 300 meters, the terminal will upload GPS data to platform.
NOTE: if the upload interval is short, the GPRS current will add up. Please set the suitable upload interval.
6.7
Corners upload (ON as default)
The terminal will upload GPS data to the platform when the vehicle is turning (the turning angle reaches the
pre-set value).
NOTE: if the speed is too low during turning, the GPS data will be not able to upload to the platform.
Send SMS command:
ANGLEREP,OFF#
to turn it off.
6.8
Arm time interval
When the vehicle is turned off (ACC low) and stays off in 3 minutes(pre-set), the terminal will enter arm status.
During this status, if the terminal detects 6 vibrations (default) and the vehicle still stays off (ACC off) in 30
seconds, it will activate vibration alarm.
Send SMS command:
DEFENSE,T#
(1
≤
T
≤
60 minutes)
e.g.
DEFENSE,15#
It means after 15 minutes the vehicle is turned off, the terminal will enter defense mode.
6.9
Reboot the terminal
Send SMS command:
RESET#
When the terminal receives the command, it will reboot in 20 seconds.
7
Operation
7.1
Check location
(1) Ask for coordinates
Send SMS command from SOS number to the terminal:
WHERE#
Only SOS number can apply for replying longitude and latitude from the terminal. If GPS is located, it will reply
latest longitude and latitude information.
e.g. Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28
If GPS is not located at all, the terminal will reply: “NO DATA!”
(2)Ask for Google link
Send SMS command from SOS number to the terminal:
URL#
If GPS is located, it will reply google link of latest longitude and latitude.
e.g. Google link reply
<DateTime:10-11-23 23:42:51> http://maps. google.com/maps?q=N22.571490,E113.877103
Содержание JM01
Страница 1: ...User Manual ...
