JIMCO MAC500s Скачать руководство пользователя страница 2

IMPORTANT SAFETY INSTRUCTIONS

REED AND SAVE THESE INSTRUCTIONS

WARNING!!!

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS OBSERVE THE 
FOLLOWING:

Before opening the appliance, it must be switched off, and unplugged from the socket to prevent 
being switched on accidentally. When the service disconnecting means cannot be locked, securely 
fasten a prominent warning device, such as a tag. When the device is open, there is a risk of radiation 
from the UV-C light.

This can lead to painful corneal inflammation (conjunctivitis) 

When servicing or replacement of a component make sure to reinstall or remount all safety 
requirements as previously installed.

Use this unit only in the manner intended by the manufacturer. If you have questions, contact the 
manufacturer.

Skin or eye damage may result from directly viewing the light produced by the lamp in this 
apparatus. Always disconnect power before relamping or servicing. Replace Lamp With Lamp Model 
No. J205-1122-8W UV-OZ LL, Manufactured by JIMCO. Do not operate any appliance with a 
damaged cord or plug. Discard appliance or return to an authorized service facility for examination 
and/or repair

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. 
Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it 
will not be tripped over.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the 
risk of electric shock by providing an escape wire for the electric current. This appliance is equipped 
with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet 
that is properly installed and grounded. Improper grounding can result in a risk of electric shock.

Place the machine on a solid surface. Profitable high for the best effect.

For wall mounting, follow instructions on page 6-10.

Never immerse the appliance in water.

For indoor use only.

Description

MAC500s produces UV-C light under controlled conditions. Different UV-C wavelengths have 
different properties. The MAC500s uses two wavelengths. One is a powerful sterilizer when it is 
in direct contact with pathogens and the other wavelength uses the available oxygen (O

2

) to 

naturally produce a low level of ozone (O

3

). The low level of ozone recreates the fresh air from 

outside in nature inside your home or office. The ozone dynamically attacks dangerous airborne
pathogens in the air you breathe and can deactivate airborne virus.

This method is called photolytic oxidation and  JIMCO A/S has won EU environmental Award for 
Developing a Cleaner Technology. 

The purpose with the MAC500s is to purify the air you breathe. 

2

Содержание MAC500s















Отзывы: