4
SFP3-14-GB
www.jilong.com
Read Important Safety Instructions and Follow all Safety Cautions
Parts List
FIG. 01
FIG. 02
No.
Name
Quantity No.
Name Quantity
P1 Manometer
1
P2
Control
valve
1
P3
Drain nut
1
P4
Adapter
2
P5 Seal ring of
control valve
1
P6
Control
valve
retainer
1
P7
Control
valve screw
2
P8
Body
1
P9
Central
connecting
pipe
1
P10 Pedestal
1
P11 Drain valve
1
P12 Connecting
pipe
1
P13
Slag
blocking
screen
1
P14
Seal ring
of slag
blocking
barrel
1
P15
Cover of
slag blocking
barrel
1
P16 Positioning
plate
1
P17
Strap
6
P18 Water pipe
2
Installation Instructions
Tools required: 1 Phillips screwdriver
Product installation position and assembly:
· The product must be installed on firm and level ground.
· Provide sufficient space and light for the convenience of
daily maintenance.
· The motor must be ventilated for cooling. Do not put the
product in a wet place with no ventilation.
At least 2 persons are recommended to install the product.
1. Position the product in the place selected.
2. Make sure the connection between the body and the
pedestal is good.
Important note: the product must be positioned on the ground
or a permanently upward pedestal in some EU countries. To determine whether there
are any regulations on surface pool filters consult the local authorities. If any, fix the
filter using two holes drilled in a platform. (See FIG. 02)
The sand filter pump should be secured on a cement pedestal or wood platform to
avoid it tipping over.
Note: the hole diameter of the pedestal is 6.4mm.
Note: the maximum diameter of the two screws and lock nuts used is 6.4mm.
