ETM1-14-GB
www.jilong.com
4
5
ETM1-14-GB
www.jilong.com
2014
STEERING
To adjust steering counter-force, simply loosen or tighten the counterforce bolt. The ideal setting is
one where the counterforce bolt is just tight enough so that the boat will steer in the direction you are
aiming without need for continual correction.
ANGLE ADJUSTMENT
F series motor is able to adjust the angle of handle to make comfortable for user’s control.
Please follow these steps to make adjustment.
1. Loose the button (E) so that the handle can move upwards and downwards freely.
2. Keep the handle to the adequate angle that is suitable to control.
3. Tight the button to finish the adjustment.
SPEED CONTROL
The speed control, featuring five forward and three reverse speeds, is integrated into the handle. Turn
the handle clockwise to move forward and anti-clockwise to go backwards. When you don’t want to
move, set the handle into neutral. No power will be used in this setting. (D)
Tight adjust button
(D)
(E)
Warning:
Remember always disconnect from batteries once the motor leaves water as a rotating
propeller cancause personal injury.
Remember to wash the motor by using fresh water after used it in salt water as it can greatly
reducethe possibility of corrosions.
Warning:
The angle adjustment range is ± 60°, DO NOT exceed this limit; force to rotate the handle will
cause the motor damage.