16
12
13
waist belt
shoulder
belt
4.6 Check the belt and
make sure its route
goes on correctly
●
Do not place your baby car
seat too close to the car seat
belt buckles( Figure 17-18 ).
7
4.5 Installation in vehicle
1
）
Switch the seat handle to “carrier position”,then place this seat onto the back row car seat near
the vertical cushion. The seat should be opposite to the driving direction ( Figure 12 ).
2
）
Pull out the car belt as long as possible. Place the lap belt over this seat and lock the car belt.
Then put the lap belt into the belt route guider(Figure 13).
Note
：
No twisting or slipping of the car belts.
3
）
Drag the shoulder belt over the baby seat.put the shoulder belt into the blue belt route guider
(Figure 14-15).
Note
：
No twisting or slipping of the car belts.
4）
Fasten the car belt (Figure 16)
●
push the baby seat to the car seat.
●
pull the lap belt horizontally to fasten it.
●
Pull the upper shoulder belt to fasten the rest parts and the whole car belt.
Note
：
Make sure the baby safety seat is fixed well.
14
15
C
17
18