2 When using the battery, insert the DC connector into the battery compartment hole, and
unplug the power connector when not in use for a long time to save power. As shown below.
3. This product can use 4pcs No.5 batteries on the product for power supply.
1 As shown below, the battery installation method: use a screwdriver to remove the screws on
battery cover, and then remove the battery cover, put the battery in the battery slot with correct
polarity, and then cover the battery cover and fixed. Remove the battery according to above steps.
1.
AC
plug
connect
with
100-240V
50/60HZ 0.3A AC socket
2.
Out
voltage
of
adapter,5-6V,¡ Ü
8 00mA
4. DC plug
3. Power connector
4.close
battery
cover, inlay
the two head screw tightly.
3.adjust
battery
to
flat position
2
. put positive
side of
battery
into the side of
battery with + mark.
1.put negative
side of
battery
into the side of
battery jar with spring.
WARNING!
8
