Confidential & proprietary. Copyright 2022 Jigabot LLC, all rights reserved. [email protected] www.Jigabot.com Ph. 801-995-368 3
Quick-Start Guide
Quick Test!
Jigabot EX Twofer
Once you unpack your EX Bots, and before assembling them, do a quick test with each
to see how simple they are to operate.
Do the following setup:
1. Attach the Jigabot EX to a Tripod
2. Plug in the power supply, and press IN the power button
3. Tightly plug in a set of DOTs to the DOTdriver, and hold the power button IN
for 3 seconds
Stand 6 feet in front of the Jigabot EX, and move the dots slowly from side to side.
Congratulations, you’re tracking!
Plug in power supply
NOTE: it takes about 45
seconds to boot up
before you can track
Attach tripod here A Jigabot tripod accessories use
a professional standard stud which is 3/8”-16 and fits
into the Jigabot EX directly without an adapter.
Press power ON
(this is the back of the
Jigabot EX)
Plug in a set of DOTs
(press very firmly)
STEP 2
STEP 3
STEP 1
NOTE: You only need to use the included 3/8”-16 to
1/4”-20 thread insert (Tripod Adapter) if you are using
a 1/4”-20 threaded consumer tripod.
Press and hold power button
(for 3 seconds)
NOTE: to power OFF, press and hold the same
button for 3 seconds
