[6]
SERVICE & REPAIR INFORMATION
BLADE TEETH REPLACEMENT INSTRUCTIONS –
When
replacing blade teeth, the beveled edge of teeth and the head of the
capscrews should face the ice. The stamped part number on the
teeth should face away from the ice, as shown in the diagram. Use
two 7/16” wrenches to remove the capscrews. When attaching
blades, finger tighten all fasteners, then fully tighten with wrenches.
CAUTION – THE BLADE TEETH ARE SHARP AND
SHOULD BE HANDLED CAREFULLY TO AVOID FLESH
CUTS OR INJURY.
Blade Warranty
Instructions:
1.
Please send the following information:
Name,
Address,
City, State/Province, Zip/Postal Code,
Country,
Telephone Number,
Email Address,
Date of Purchase
Jiffy® Serial Number
2.
Send sales receipt, UPC label ( No Photocopies), three
Stealth STX™ Blades or the Ripper™ blade and $17.95 in
US dollars for return Shipping and Handling to:
Feldmann Engineering & Mfg. Co. Inc.
520 Forest Avenue
Sheboygan Falls, WI 53085 USA
Jiffy® Blade Warranty –
●
One Time Sharpening or Replacement
●
Expires Two Years after Date of Purchase
Please Allow 3 Weeks for Delivery!
ENGINE SPEED – NEVER TAMPER WITH ENGINE SPEED
CONTROL SYSTEM, OVERSPEEDING THE ENGINE CAN
BE DANGEROUS AND MAY CAUSE PERSONAL INJURY
OR DAMGE TO UNIT. TAMPERING WITH ENGINE SPEED
CONTROL SYSTEM WILL VOID ENGINE WARRANTY.
For
engine
adjustments, repairs or warranty service not covered in
this manual, visit our web site at www.jiffyonice.com,visit one of our
authorized Jiffy service, or for Canadian customers, please call 1-
800-861-9559. When requesting warranty service, Jiffy® ice drill
proof of purchase (sales receipt) establishes the date of sale and the
start of the warranty period.
