Jiajia JJ298 Скачать руководство пользователя страница 25

•  

It is parents' responsibility to check main parts of the toy before using, Must 

regularly examine for potential hazard, such as the battery, charge,cable or 
cord, plug, screws are fastening enclosure of other parts and that in the event 
of such damage, the toy must not be used until that damage had been properly 
removed. 

•  Make sure the plastic parts of the vehicle are not cracked or broken.

•  Occasionally use a lightweight oil to lubricate moving parts such as wheels.

•  Park the vehicle indoors or cover it with a tarp to protect it from  wet weather. 

•  Keep the vehicle away from sources of heat, such as stoves and heaters. 

Plastic parts may melt.

•  Recharge the battery after each use. Only an adult can handle the battery. 

Recharge the battery at least once a month when the vehicle Raider is not 
being used. 

•  Do not wash the vehicle with a hose. Do not wash the vehicle with soap and 

water. Do not drive the vehicle in rainy or snowy weather. Water will damage 
the motor, electric system and battery. 

•  Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a 

non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.

•  Do not drive the vehicle in loose dirt, sand or fine gravel which could damage 

the moving parts, motors or the electric system.

•  When not using, all the electrical source should be turn off. Turn off the power 

switch and disconnect the battery connection.

Maintaining   

  23

Maintaining    

  24

Содержание JJ298



























Отзывы: