JI-EE ATV BXL 100, Руководство по обслуживанию

Страница: 10 / 61

When the drive chain becomes very dirty, it should be
removed, cleaned and lubricated by specify lubricator.
Using commercial chain lubricant to lubricate the drive
chain.
Clean the drive chain with kerosene and wipe it dry.
Inspect the drive chain for possible wear or damage.
Replace the chain, if it is worn excessively or damaged.
Inspect the sprocket teeth, if it is excessive wear
or damage, replace it.
2.10 BRAKE SYSTEM
Inspect the front brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the brake lever at the end of the
brake lever. The standard of free play is 15-25 mm.
Inspect the rear brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the rear brake lever at the end of
the lever. The standard is 10-20 mm.
2.11 WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails or other
sharp objects.
Check the tire surfaces at cold tire condition.
The standard of tire pressure is 12 psi (0.8 kgf/cm
2
).
9