manualshive.com logo in svg

JHCTech KMDA-3601, Руководство пользователя, Страница: 3 / 54

Поделиться
Скачать
JHCTech KMDA-3601 Скачать руководство пользователя страница 3

 

 

User’s Manual

 

I 

 

 

Copyright 

The documentation and the software included with this product are copy- righted 2018 by Shenzhen JHC 

Technology Co.,  Ltd.  All  rights  are reserved. Shenzhen JHC  Technology Co.,  Ltd.  reserves  the  right  to 

make improvements in the products described in this manual at any time without notice. No part of this 

manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior 

written permission of Shenzhen JHC Technology Co., Ltd. Information provided in this manual is intended 

to be accurate and reliable. However, Shenzhen JHC Technology Co., Ltd. assumes no responsibility for 

its use, nor for any infringements of the rights of third parties, which may result from its use. 

 

 

 

Acknowledgements 

Award is a trademark of Award Software International, Inc. 

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. 

Intel and Pentium are trademarks of Intel Corporation. 

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. 

RTL is a trademark of Realtek Semi-Conductor Co., Ltd. 

All other product names or trademarks are properties of their respective owners. 

For  more  information  on  this  and  other  JHC  products,  please  visit  our  websites  at: 

http://www.jhctech.com.cn 

 

 

 

Содержание KMDA-3601























































Отзывы:

Нет отзывов