JHCTech KMDA-3230 Скачать руководство пользователя страница 5

Страница: 5 / 76

User’s Guide

III

Declaration of Conformity

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from JHC. Please

contact your local supplier for ordering information. Test conditions for

passing included the equipment being operated within an industrial enclosure.

In order to protect the product from being damaged by ESD (Electrostatic

Discharge) and EMI leakage, we strongly recommend the use of

CE-compliant industrial enclosure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Technical Support and Assistance

Step 1.

Visit the JHC web site at

www.jhctech.com.cn

where you can find the latest information about the

product.

Step 2.

Contact your distributor, sales representative, or JHC’s customer service center for technical

support if you need additional assistance. Please have the following information ready before you

call:

- Product name and serial number

- Description of your peripheral attachments

Содержание KMDA-3230













































































Результаты поиска

Содержание KMDA-3230

Отзывы:

JHCTech KMDA-3230, Руководство пользователя, Страница: 5 / 76

Результаты поиска

Содержание KMDA-3230

Отзывы: