JHCTech ALAD-101T, Руководство пользователя

Страница: 13 / 22

User’s Manual
7
2.1.1 Power Input Connector (DC-IN)
This 3-pin 3.81mm connector provides maximum of 60W power and is considered a low power solution.
Connect a DC power cord to this connector . Use a power adapter within 9 ~36V DC output voltage. Using
a voltage out of the range 9 ~36V may fail to boot the system or cause damage to the system board.
Figure 2.3 3-pin 3.81 Connector
Table 2.1: Power Connector Pin Assignments
Pin Signal Name
1 +9~36V
2 NC
3 GND
2.1.2 USB Connector
1 USB2.0 ports by type A connectors in the front . Please refer to Table 2.2 for their pin assignments.
Figure 2.4 USB2.0 connector
Table 2.2: USB2.0 Connector
Pin Signal name
1 VCC
2 USB_P0
3
4 GND
2.1.3 COM Connector
There is a COM which is D-sub 9-pin connectors , it’s RS232 by default. The serial ports are
asynchronous communication ports with 16C550A-compatible UARTs that can be used with computer
and other serial devices.