Health and fresh!
15
Switch : Turn on / off heater.
Mode : Set Auto / Manual mode.
Auto mode: set temperature.
Manual mode: Set temperature at 40
℃
(Unchangeable).
Level : Change heating levels.
Level_1 :
Heating at 25% power.
Level_2 :
Heating at 50% power.
Level_3 :
Heating at 75% power.
Level_4 :
Heating at 100% power.
Fast Hot : Turn on / off fast heat mode.
Timer : Set upmost 30 time logs.
WIFI signal strength : Shows the Wi-Fi signal strength. It comes the best at 100.
Note:
(1) All the above pictures are under iOS system. There’s a slight difference between Android
system.
(2) All the indications are just for your reference.
12. INSPECTION ITEMS AFTER INSTALLATION
Items to be checked
Situation caused by improperly i Items to be
checked installation
Is installation stable?
The equipment may fall off or shake.
Is heat insulation adequate?
Damage objects close to equipment.
Does power voltage same as voltage shown
on product nameplate?
Equipment failure.
Does wire connection correct?
Equipment failure.
Does electricity ground connected safely?
There is electricity leakage risk.