JGR TLS, Руководство пользователя

Страница: 39 / 54

TLS User Manual
TLS-UM-00001 Rev 001 35
Description of Individual Commands
IEEE-488.2 Common Commands
Clear Status Command
Syntax *CLS
Function Clears the following queues and registers:

Error queue

Standard event status register

Status byte register

Operation event register

Questionable event register
If *CLS is sent immediately after a message terminating sequence,
both the output queue and the MAV bit in the status byte register
are cleared.
Example *CLS
Standard Event Status Enable Register Command
Syntax
*ESE <space><numeric value> where 0

<numeric value>

255
Function Sets the bits in the standard event status enable register. The
numeric value is converted to a binary number. The bits of the
register are set to match the bit values of the binary number.
Example *ESE 97 sets the standard event status enable register bits to
01100001.
Standard Event Status Enable Register Query
Syntax *ESE?
Function Returns the contents of the standard event status enable register as
an integer that, when converted to a binary number, represents the
bit values of the register.
Example *ESE? returns 97 if the standard event status enable register is set
to 01100001.