JGR OA1, Руководство пользователя

Страница: 15 / 32

OA1 User Manual
10
M-OA1-001-01
5
OPERATION
Powering Up the Attenuator
To power up the attenuator:
1. Verify that the power switch is set to the “off” position (O). Connect the attenuator to an AC
power supply using the power cord provided.
2. Toggle the power switch to the “on” position (I).
Setting the Wavelength
Swipe right to access the main operations of the OA1. Pressing the λ button allows for wavelength
selection (Figure 4).
Figure 4: Front panel operation – setting the wavelength
The OA1 has 4 stored wavelength settings. Pressing the λ button a second time will display the flyout to
select the wavelength “ slot ” (Figure 5).
Use arrows to
change wavelength
Press to select wavelength