ENGLIS
H
30
If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as
there is a risk of electric shock.
If you are unable to remedy the problem by following these hints, call service and support at the phone
number shown below.
Warning:
Under no circumstances should you try to repair the set yourself, as this will invalidate the
warranty
Problem
Cause
Solution
No sound / power
Power cord not plugged-in.
Plug in power cord.
No display, no reaction
electrostatic discharge
unplug and re-plug appliance
Poor cassette sound quality
Dust and dirt on the head, etc.
Cleaning.
incompatible cassette type used
Only use IEC I (Normal) type for record-
ing.
Recording does not work
Cassette’s tab might be broken;
wrong cassette used
Before you cover the hole with a tape
check again, whether this is the tape you
want to overwrite.
Over writing can’t be undone.
The CD skips tracks
CD damaged or dirty
Replace or clean CD
A program is active
leave the program
“ND” is indicated on the display
There is no CD in the CD tray.
Insert a CD.
CD badly scratched or dirty.
Replace or clean CD.
Laser lens has steamed up
Wait until lens has cleared
CD-R is blank or the disc is not “final-
ized”
Use a finalized CD-R
CD playback does not work
CD badly scratched or dirty
Replace or clean CD
Laser lens steamed up
Wait until lens has cleared
USB / Memory card failure
connecting error
Unplug and reinsert memory card or USB
stick
USB device does not contain playable
files
Use a USB / Memory Card containing
MP3 or WMA files
If the troubleshooting fails to solve your problem, please contact our service & support hotline. In case
your product needs to be sent to our service centre, please use the provided return sticker. If the return
sticker is missing, please contact the service & support hotline.
TROUBLE SHOOTING
MS470_ALL VERSION.indd 30
10/6/08 10:39:10 AM