ENGLISH
30
CONNECTIONS
Connecting an external device
• An external playback device (e.g. MP3 player) can be connected to this device using the
AUX IN
jack (3) and
music can be played back via the speakers.
•
Attention:
Before connecting your external playback device, please also read the operating instructions for
information regarding safety instructions and usage with other devices.
• Turn off this device and the external playback device.
• Connect the external playback device using a stereo cable (Ø3.5 mm). The cable is not included in the scope
of delivery.
• Connect the stereo cable to the
AUX IN
jack (3) on the top of the device. If the plug does not fit into the
AUX IN
jack, use a trade-standard adaptor (not supplied). Insert the other end into the headphone jack or
the LINE-OUT output of the playback device. If the external device has a smaller or larger jack, then use a
suitable adaptor (not included in the scope of delivery).
• First turn on the external device and set the volume to zero. Then turn this device on and set the volume to
zero as well.
• Switch the
FUNCTION
switch (23) to the operating mode
CD/AUX.
• Set the volume of both devices. If the external device is connected to this device via the LINE-OUT jack,
control the volume with this device.
• Set the playback functions on the external device.
• Note that if you switch off this device only, the external device will continue playing.
Headphones
• This device has a 3.5 mm headphone jack (24), to which you can connect most headphones or earphones
(not included in scope of delivery).
•
Note:
Headphones with right angle plugs cannot be directly connected to the headphones jack (24). In this
case use a trade-standard adaptor (not included in scope of delivery).
• If the headphone or earphone is connected to the headphone jack, the built-in loudspeaker is automatically
deactivated.
• As soon as the headphones or earphones are separated from the headphone jack, the loudspeaker is
activated.
JGC-RRMP-8310-IM-DE-EN-V1.indb 30
14/05/2010 3:50 PM
