JGC JGC-MS-8110, Руководство пользователя

Страница: 36 / 47

ENGLISH
36
PLAYING AUDIO-CDS
Playing audio CDs
• As previously described, lay an audio CD in the compartment and turn the
device to CD playback mode.
• The first track number and the playback time will be shown in the display. The
display also shows the control indicator
DISC .
• Playback/pause: Press the PLAY/PAUSE (32) button, in order to begin
or pause playback. If playback has been paused, then the playback time
elapsed will blink in the display.
•
Stopping playback:
To stop playback, press the button
/BAND
(25). The
display shows the total number of tracks and the total playback time.
Fig. 11
Fig.12
Fig.13
•
Next or previous track:
Push the
TUNING -/
(33) or
/
(26) button in order to skip
to the next or to the previous track. By pushing on the
TUNING -/
button, the current track will be
repeated from the beginning. When the button is pushed twice, then the previous track will be played. By
pushing on the
/ button the next track will be played.
• Rewinding and forwarding: By holding down the buttons TUNING -/ and / , you
can rewind or forward the track currently playing. Once you have found the desired spot, let go of the button
to continue playback. During spooling, the sound is automatically set to zero.
• Repeat the track: When the button REPEAT/ENTER (28) is pushed once then the current playing track will
be continuously repeated. The control indicator RPT is shown in the display.
• Repeat the CD: When the REPEAT/ENTER button is pushed twice, then the CD will be continuously
repeated. The control indicator RPT ALL is shown in the display.
•
Random playback:
When the
REPEAT/ENTER
button is pushed three times, then the tracks will be played
in a random order. The control indicator RDM is shown in the display.
• Deactivating the playback modes: Depending on the mode, you can press on the button REPEAT/
ENTER repeatedly until the control indicator RPT , RPT ALL or RDM is gone from the display. This deactivates
the corresponding function. These playback modes are also deactivated when the CD is stopped or
otherwise interrupted.
The playback modes “RPT”, “RPT ALL” and “RDM” can also be turned on when playback is put on
pause.
Playing a set program
• This device offers the possibility of playing up to 20 tracks in a preset order. To do this, proceed as follows.
• Put a CD into the CD compartment as previously described.
• Switch the device to stop mode by pressing the button
/BAND
(25).
JGC-MS-8110-IM-DE-EN-V2.indb 36 24/08/2009 4:51 PM