19
5.2.
Display setting
Measurement distance, gain, cutoff, threshold coefficient, and brightness of the display can be
configured while measuring. Configure each setting to those are suitable to your measurement
environment and location.
Pressing the confirm button
《 》
or direction pad
《 , , , 》
shows
you a window on the left bottom of the screen. You can change the settings by pressing direction
buttons
《
or
》
while the window is open. Also, you can change the item to configure
by pressing direction buttons
《
or
》
.
It shows you “Distance” setting if you press direction pad for the first time after turning the
instrument power.
Followings are the display order of the configurable setup items.
Gain
Distance
Brightness
Cut off
Threshold
Gain
Once you change any of the settings, the most recently changed item will be shown the next time.
This is effective until you turn the power OFF. Once you turn the power OFF, “Distance” will be
the item to be shown at first. However, all configured settings are saved.
①
Measurement distance (Distance)
・
Able to configure distance to your measurement target.
Measurement distance is used for leak amount calculation. Leak
amount calculation error becomes larger as the difference between
inputted distance and actual distance becomes larger.
There is no need to configure this setting in case there is no need to
display leak amount.
・
Configurable values are 0.5m
※
and every 1 meter between 1m and 20m.
※Due to our display capability, it shows “0m” when the setting is at “0.5m”.
・
Default is 3m.
・
The window appears on left bottom of the screen once you press any of the buttons while you
are on measurement screen.
②
Brightness of the screen (Brightness)
・
Able to configure screen brightness.
Change to suitable brightness in case using in very bright or very
dark environment.
・
Configurable range is between -6 and 6. Default is 0.
・
The screen becomes brighter as the value gets higher.
・
the screen becomes darker as the value gets lower.
・
This setting is only effective to display screen and not to saved images.
0
3
