JFE Advantech ARO-FT, Руководство пользователя

Страница: 48 / 50

[Appendix 3] 1/2
Appendix 3: Examples of operation sequence
Power ON RINKO FT
Start
Wait 5 seconds
Command “querys”
“preheat”
“normal”
Command “tdo”
Store T and DO
by host controller
Command “querys”
Power OFF RINKO FT
End
“sleep” or “error=0003”
RINKO FT returns “error=0003” to the
first command “querys” while it is in sleep
mode, but it appropriately responds after
“error=0003” (see Chapters 3 and 8 in
appendix 1).
Example 1: Sample T and DO at 10 s (or more) of sampling interval.
It is much better to power on and off RINKO FT for each measurement to save energy. In other words,
please repeat the flowchart below during the observation. It may take at least 7 – 8 s for single iteration,
which depends on the host controller.
We strongly recommend to power off
RINKO FT instead of using sleep mode.
The command “querys” is used for
confirmation only and is
not required
to complete this flowchart.