SwingControl Unit
CONNECTING TO SWINGCONTROL
SwingControl contains inbuilt tool for configuring device's LAN settings and Modbus TCP/IP port. Configuration tool
can be used via standard web browser, such as Internet Explorer, Firefox or Chrome. Configuration tool is accessible in
standard http port of SwingControl device. In order to open configuration tool configurators computer must be
configured to the same network as SwingControl. Computer must be connected to SwingControl via crossover
network cable or hub/router.
SwingControl default settings
Default factory settings for SwingControl network are:
IP:192.168.0.123
Gateway: 192.168.0.1
Netmask: 255.255.255.0
Network settings for Windows 7
Windows 7 local are settings must be set so, that it is possible to access SwingControlo configuration tool. To set up
network for this purpose, the following steps need to be taken:
1. Open ”Network and Sharing Center”
2. Choose ”Local area connection”, which will open a dialog named ”Local area connection status”
PAGE
7
JEVEN Kitchen ventilation
WWW.JEVEN.COM
All rights reserved