Jevatec JEVAmet, Инструкция по эксплуатации

Страница: 6 / 24

6 BA_IOM_02.2018_EN
1.
Legal Instructions
1.1 Validity
The document applies to the following products:
Part Number Product Version Serial Number
100030 JEVAmet
®
IOM-16K 1.00 et seq. 100 et seq.
100031 JEVAmet
®
IOM-25K 1.00 et seq. 100 et seq.
Table 1
–
Part numbers
When communicating with the JEVATEC GmbH, stating the information of article number
and serial number is necessary. This information takes you please from the name plate.
1.2 Scope of Delivery
Description Number
JEVAmet
®
IOM 1
Instruction Manual (DE and EN) 1
Table 2
–
Scope of Delivery
1.3 Conventional Application
The JEVAmet
®
IOM is a hot cathode ionisation gauge by Bayard-Alpert. It has been
designed for vacuum measurement of gases in the pressure range of 5·10
-10
– 5·10
-2
mbar.
It must not be used for measuring flammable or combustible gases in mixtures containing
oxidants (e.g. atmospheric oxygen) within the explosion range.
The vacuum gauge has a flange connection DN16KF or DN25KF and can thus to suitable
flange connections be attached.
1.4 Responsibility and Warrenty
We assume the warranty for the faultless function of the device for one year. All in material
and manufacturing defects will be cleared free of charge within this period.
The JEVATEC GmbH will not assume any responsibility or warranty in case the operator or
third persons
•
do not observe the information given in this document.
•
do not use the product as intended.
•
modify the product in any way (conversions, repair work etc).
•
operate the product with accessories not listed in the corresponding product
documentation.
The end-user assumes the responsibility in conjunction with the process media used. Gauge
failures due to contamination or wear and tear are not covered by the warranty.
Subject to technical alterations without prior notice. The figures are not binding.