16
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
“Master” and the second HDD is referred to as the “Slave”.
•
For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
(10) Serial-ATAII Port connector: D-
SATA 1,
D-
SATA 2,
D-
SATA 3
These connectors support the provided Serial ATA2 hard disk cables to connecting the
motherboard with serial ATAII hard disks. E-SATA1 is not for SATA hard drive, it is
only for connecting to a SATA connector of the D-SATA1, D-SATA2 or D-SATA3 to
let the ESATA port work.
Serial-ATA2 Port Connector
SATA4
SATA6
SATA2
SATA1
SATA3
SATA5
2-6-2 Headers
(1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO1
These headers connect to Front Panel Line-out, MIC connector with cable.
Line-Out, MIC Headers
AUDIO
Pin 1
AU
D-Line
out2
-L
AU
D
-
MI
C
-
R
AU
D-Line
out2
-R
SENS
E-SEN
D
GND
SEN
SE2-R
ETUR
PRESE
NCE
2
9
10
KEY
AUD
-MIC
-L
SENSE
1-RET
URN
(2) USB Port Headers (9-pin): USB1/USB2
These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
