10
2-4
Install
Memory
This motherboard provides two 240-pin DDR2 DUAL INLINE MEMORY MODULES
(DIMM) socket for DDR2 memory expansion available from minimum memory volume of
128MB to maximum memory volume of 4 GB DDR SDRAM.
Valid Memory Configurations
Bank
240-Pin DIMM
PCS
Total Memory
Bank 0, 1 (DIMM1)
DDR2 533/DDR2 667/DDR2 800/DDR21066
X1
128MB
∼
2 GB
Bank 2, 3 (DIMM2)
DDR2 533/DDR2 667/DDR2 800/DDR21066
X1
128MB
∼
2 GB
Total
System Memory (Max 4 GB)
2
128MB
∼
4 GB
Recommend DIMM Module Combination
1.
One DIMM Module ----Plug in DIMM1
2.
Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function
Dual channel Limited!
1.
Dual channel function only supports when 2 DIMM Modules plug in both DIMM1 & DIMM2/
2.
Memory modules plugged in DIMM1 & DIMM2 must be of the same type, same size, and
same frequency for dual channel function.
Install DDR II modules to your motherboard is not difficult, you can refer to figure below
to see how to install a 240-Pin DDR2 667/DDR2 800/DDR2 1066 module.
DI
M
M
3 (
BAN
K2+
BAN
K3)
DI
M
M
4 (
BAN
K0+
BAN
K1)
DIMM1 & DIMM2: Dual Channel
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should be locked
into the DIMM module very firmly and fit into its indention on both sides.