background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

14 

 

      

 

Pin 1

Floppy Drive Connector

 

(10)  Primary IDE Connector (40-pin block): IDE1 

 

This connector supports the provided IDE hard disk ribbon cable. After connecting the 
single plug end to motherboard, connect the two plugs at other end to your hard disk(s). 
If you install two hard disks, you must configure the second drive to Slave mode by 
setting its jumpers accordingly. Please refer to the documentation of your hard disk for 
the jumper settings. 

 

        

 

Primary IDE Connector 

Pin 1

IDE1

 

(11)  Secondary IDE Connector (40-pin block): IDE2 

 

This connector connects to the next set of Master and Slave hard disks.  Follow the 
same procedure described for the primary IDE connector. You may also configure two 
hard disks to be both Masters using one ribbon cable on the primary IDE connector and 
another ribbon cable on the secondary IDE connector. 

 

 

 

 

Secondary IDE Connector

Pin 1

IDE2

 

 

Two hard disks can be connected to each connector.  The first HDD is referred to as the 
“Master” and the second HDD is referred to as the “Slave”. 

 

For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM 
drive on the same IDE channel as a hard disk.  Otherwise, the system performance on this 
channel may drop. 

Содержание V2MDMP

















































Отзывы: