10
This motherboard provides
three
184-pin DUAL INLINE MEMORY MODULES
(DIMM) sites for DDR memory expansion available from minimum memory size of
64MB to maximum memory size of 3.0GB DDR SDRAM.
Valid Memory Configurations
Bank
184-Pin DIMM
Total Memory
Bank 0, 1 (DIMM1) DDR200/DDR266/
DDR333
DDR SDRAM Module
X1 64MB
∼
1.0GB
Bank 2, 3 (DIMM2) DDR200/DDR266/
DDR333
DDR SDRAM Module
X1 64MB
∼
1.0GB
Bank 4, 5 (DIMM3) DDR200/DDR266 DDR SDRAM Module
X1
64MB
∼
1.0GB
Total
System Memory (Max. 3.0GB)
3
64MB
∼
3.0GB
NOTE!
Due to SiS 645 chip specification limited it only can support
2 pcs
DDR333
module when DDR clock setting in 166MHz.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you
can refer to figure 2-4 to see what a 184-Pin DDR SDRAM module looks like.
DI
M
M
2
(B
A
N
K
2+
B
A
N
K
3)
DI
M
M
1
(B
A
N
K
0+
B
A
N
K
1)
DI
M
M
3
(B
A
N
K
4+
B
A
N
K
5)
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 133MHz, use only DDR266-
compliant DDR Modules. When this motherboard operate at 133Mhz, most
system will not even boot if non-compliant modules are used because of the
strict timing issues, if your DDR Modules are not DDR266-compliant, set
the SDRAM clock to 100MHz to ensure system stability.
2-5 Expansion Cards
Figure 2-4
