35
This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Miscellaneous Control
Item Help
CPU Clock Ratio 8X
Auto Detect PCI/DIMM Clock Enabled
Spread Spectrum Disabled
** Current Host/PCI Clock is
Host/PCI Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at next Boot is
CPU Vcore Select Default
AGPVDD Output 1.5V(Default)
VRAM Output 2.6V(Default)
Chipset 2.5V 2.55V(Default)
VTT Voltage 1/2 VRAM
VAGP LUV Protect Enabled
VRAM LUV Protect Enabled
Dual3.3V LUV Protect Disabled
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host/PCI Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz
∼
132MHz, 133MHz
∼
200MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz (only select CPU Frequency 100MHz.)
AGPVDD Output
This item allows you to select 1.5V of the AGP 4X VGA card. The choice are: 1.5V, 1.6V.
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V,
2.8V.
3-12 Load Standard/Optimized Defaults
