25
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable device connected to MSATA port.
SATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable SATA port.
Hot Plug
The optional settings: [Disabled]; [Enabled].
PCH-FW Configuration
Press [Enter] to view ME information and make settings in the following sub-items:
TPM Device Selection
Use this item to select TPM device. The optional settings: [dTPM]; [PTT].
[PTT]:
Enable PTT in SkuMgr.
[dTPM]:
Disable PTT in SkuMgr.
Warnning!!
PTT/dTPM will be disabled and all data saved on it will be lost!
Firmware Update Configuration
Press [Enter] to make settings for ‘
ME FW Image RE-Flash
’.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
* In the case that user needs to update ME firmware, user should set
‘ME FW
Image Re-Flash
’ as [
Enabled
], save the settings and exit. The system will turn off
and reboot after 4 seconds. If the user goes to BIOS screen again will find this item
is set again as [
Disabled
], but user can still re-flash to update firmware next time.
Trusted Computing
Press [Enter] to enable or disable Security Device Support.
Configuration
Security Device Support
Use this item to enable or disable BIOS support for security device. TCG EFI
