JETWAY NMF691 Series Скачать руководство пользователя страница 28

Страница: 28 / 38

►

Serial Port 1 Configuration

Press [Enter] to make settings for the following items:

Serial Port

Use this item to enable or disable serial port (COM).

Change Settings

Use this item to select an optimal setting for super IO device.

Transmission Mode Select

The optional settings are: [RS422]; [RS232]; [RS485].

Mode Speed Select

The optional settings are: [RS232/RS422/RS485=250kbps]; [RS232=1Mbps,
RS422/RS485=10Mbps].

Serial Port FIF0 Mode

The optional settings are: [16-Byte FIF0]; [32-Byte FIF0]; [64-Byte FIF0]; [128-Byte
FIF0].

►

Serial Port 2 Configuration/ Serial Port 3 Configuration/Serial Port 4

Configuration/ Serial Port 5 Configuration/ Serial Port 6 Configuration

Press [Enter] to make settings for the following sub-items:

Serial Port

Use this item to enable or disable serial port (COM).

Change Settings

Use this item to select an optimal setting for super IO device.

Serial Port FIF0 Mode

The optional settings are: [16-Byte FIF0]; [32-Byte FIF0]; [64-Byte FIF0]; [128-Byte
FIF0].

WatchDog Reset Timer

Use this item to enable or disable WDT reset function. When set as [Enabled], the
following sub-items shall appear:

WatchDog Reset Timer Value

User can set a value in the range of [4] to [255].

WatchDog Reset Timer Unit

The optional settings are: [Sec.]; [Min.].

WatchDog Wake-up Timer in ERP

This item support WDT wake-up while ‘

ERP Support

’ is set as [Auto].

The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:

WatchDog Wake-up Timer Value in ERP

User can select a value in the range of [10] to [4095] seconds when ‘

WatchDog

Reset Timer Unit

’ set as [Sec]; or in the range of [1] to [4095] minutes when

‘

WatchDog Reset Timer Unit

’ set as [Min].

WatchDog Reset Timer Unit

The optional settings are: [Sec.]; [Min.].

ATX Power Emulate AT Power

This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select ‘AT or ATX Mode’ on MB jumper at first

(refer to

Page

, Pin(1-2) of AT_COPEN jumper for ATX Mode & AT Mode Select).

Case Open Detect

Use this item to detect case has already open or not, show message in POST.

Содержание NMF691 Series







































Результаты поиска

Содержание NMF691 Series

Отзывы:

Похожие инструкции для NMF691 Series

Бренды по названию

Популярные бренды

JETWAY NMF691 Series, Руководство пользователя

Результаты поиска

Содержание NMF691 Series

Отзывы:

Похожие инструкции для NMF691 Series

Бренды по названию

Популярные бренды