27
Use this item to set maximum time the device will take before it properly reports
itself to the host controller. ‘Auto’ uses default value: for a root port it is 100 ms, for
a hub port the delay is taken from hub descriptor. The optional settings: [Auto];
[Manual].Select [Manual] you can set value for the following sub-item:
Device
Power-up delay in seconds,
the delay range in from 1 to 40 seconds in one
second increments.
►
Super I/O Configuration
►
COM1 Port Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM1).
Change Settings
Use this item to select an optimal setting for super IO device.
►
COM2 Port Configuration
Press [enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM2).
Change Settings
Use this item to select an optimal setting for super IO device.
Serial Port Mode Select
Use this item to set serial port as RS232 or RS422/485.
PS2 KB/MS Connect
Use this item to set PS2 connect primary devices. The optional settings are:
[Keyboard First]; [Mouse First].
CIR Controller
Use this item to enable or disable CIR controller.