JETWAY NF894 Series, Руководство пользователя

Страница: 34 / 51

29
This item should be set as [ Disabled ] if you wish to have all active wake-up
functions.
Case Open Detect
Use this item to detect case has already open or not, show message in POST.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will detect if COPEN has been short or not (refer to
Page 11); if
Pin 7&8 of J1 is short, system will show Case Open Message during
POST.
WatchDog Reset Timer
Use this item to enable or disable WDT reset function. When set as [Enabled], the
following sub-items shall appear:
WatchDog Reset Timer Value
User can select a value in the range of [10] to [255] seconds when ‘ WatchDog
Reset Timer Unit ’ set as [Sec]; or in the range of [1] to [255] minutes when
‘ WatchDog Reset Timer Unit ’ set as [Min].
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up.
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
User can select a value in the range of [10] to [4095] seconds when ‘ WatchDog
Wake-up Timer Unit ’ set as [Sec]; or in the range of [1] to [4095] minutes when
‘ WatchDog Wake-up Timer Unit ’ set as [Min].
WatchDog Wake-up Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select ‘AT or ATX Mode’ on MB jumper at first (refer to
Page