54
System State after Power Failure
Use this item to specify what state to go to when power is re-applied after a power
failure (G3 state).
The optional settings: [Always On]; [Always Off]; [Former State].
*
Note
:
The option [Always On] and [Former State] are affected by ‘
ERP Support
’
function. Please disable ERP to support [Always On] and [Former State] function.
3-9 Security Menu
Security menu allow users to change administrator password and user password
settings.
Administrator Password
If there is no password present on system, please press [Enter] to create new
administrator password. If password is present on system, please press [Enter] to
verify old password then to clear/change password. Press again to confirm the new
