27
mSATA
Port
Use this item to enable or disable device connected to MSATA port.
The optional settings: [Disabled]; [Enabled].
PCH-FW Configuration
Press [Enter] to view Management Engine technology parameters and make
settings in the following sub-items:
TPM Device Selection
Use this item to select TPM device. The optional settings: [dTPM]; [PTT].
[PTT]:
Enable PTT in SkuMgr.
[dTPM]:
Disable PTT in SkuMgr.
Warnning!!
PTT/dTPM will be disabled and all data saved on it will be lost!
Firmware Update Configuration
Press [Enter] to make settings for ‘
ME FW Image RE-Flash
’.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
* In the case that user needs to update ME firmware, user should set ‘ME FW
Image Re-Flash’ as [Enabled], save the settings and exit. The system will turn off
and reboot after 4 seconds. If the user goes to BIOS screen again will find this item
is set again as [Disabled], but user can still re-flash to update firmware next time.
AMT Configuration
Use this item to configure Active Management Technology parameters.
Press [Enter] to make settings for the following sub-items:
Intel AMT
Use this item to enable or disable Intel Active Management Technology BIOS
extension. The optional settings: [Disabled]; [Enabled].
When set as [Disabled], AMT BIOS Features are no longer supported and user is
no longer able to access MEBx Setup.
When set as [Enabled], the following sub-items shall appear:
Hide Un-Configure ME Confirmation Prompt
Use this function to enable or disable Hide Un-Configure ME without password
