31
Use this item to enable or disable system wake-up by RTC alarm.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased
minute(s).The settings range is from [1] ~ [60] minute(s).
PS2 KB/MS Wake-Up from S3-S5
The optional settings: [Disabled]; [Enabled].
*Note: PS2 KB/MS wake-up function is affected by ERP function in S4-S5. Please
disable ERP before activating this function in S4-S5.
USB Wake-Up from S3-S4
The optional settings: [Disabled]; [Enabled].
*Note: USB wake-up function is affected by ERP function in S4. Please disable
ERP before activating this function in S4.
USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
Legacy USB Support
The optional settings are: [Enabled]; [Disabled]; [Auto].
[Enabled]:
To enable legacy USB support.
[Disabled]
: To keep USB devices available only for EFI specification,
[Auto]:
To disable legacy support if no USB devices are connected.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
The optional settings are: [Enabled]; [Disabled].
USB Mass Storage Driver Support
The optional settings are: [Disabled]; [Enabled].
USB Hardware Delays and Time-outs:
USB Transfer Time-out
Use this item to set the time-out value for control, bulk, and interrupt transfers.
The optional settings are: [1 sec]; [5 sec]; [10 sec]; [20 sec].
Device Reset Time-out