JETWAY NF632E Series, Руководство пользователя

Страница: 36 / 53

31
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable each SATA port.
Hot Plug
The optional settings: [Disabled]; [Enabled].
mSATA
Port
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable device connected to MSATA slot.
4
PCH-FW Configuration
Press [Enter] to view ME information and make settings in the following sub-items:
TPM Device Selection
Use this item to select TPM device.
The optional settings: [dTPM]; [PTT].
The default setting is: [dTPM].
[PTT]: Enable PTT in SkuMgr.
[dTPM]: Disable PTT in SkuMgr.
Warnning!! PTT/dTPM will be disabled and all data saved on it will be lost!
4
Firmware Update Configuration
Press [Enter] to make settings for
‘
ME FW Image RE-Flash
’
.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
* In the case that user needs to update ME firmware, user should set
‘
ME FW
Image Re-Flash
’
as [Enabled], save the settings and exit. The system will turn off
and reboot after 4 seconds. If the user goes to BIOS screen again will find this item
is set again as [Disabled], but user can still re-flash to update firmware next time.