JETWAY NC7A Series, Руководство пользователя

Страница: 35 / 42

30
The optional settings: [Disabled]; [Enabled].
Max CPU C-State
This item controls Max C-state that the processor will support.
The optional settings: [C7]; [C6]; [C1].
S0ix
Use this item to enable or disable CPU S0ix state.
The optional settings: [Disabled]; [Enabled].

SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Controller
The optional settings are: [Enabled]; [Disabled].
When user set it as [Enabled], the following items will show up for user to make
further settings:
SATA Speed Support
The optional settings are: [Gen1]; [Gen2].
SATA Mode Selection
The optional settings are: [IDE]; [AHCI].
SATAPort
The optional settings are: [Enabled]; [Disabled].
M.2
The optional settings are: [Enabled]; [Disabled].

Network Stack Configuration
Press [Enter] to go to ‘ Network Stack ’ screen to enable or disable UEFI Network
Stack.
Network Stack
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Ipv4 PXE Support
The optional settings are: [Disabled]; [Enabled].
Use this item to enable Ipv4 PXE Boot Support. When set as [Disabled], Ipv4 boot
optional will not be created.
Ipv6 PXE Support
The optional settings are: [Disabled]; [Enabled].