manualshive.com logo in svg

JETWAY NAF791 Series, Руководство пользователя, Страница: 39 / 42

Поделиться
Скачать
JETWAY NAF791 Series Скачать руководство пользователя страница 39

 

 
                                                                                                                                                                                                                                                                                                                                           

 
 
 

35 

PCIE3 Slot/PCIE4 Slot 

Use this item to control respective PCI Express Root Port. 
The optional settings are: [Disabled]; [Enabled]. 

Speed 

The optional settings are: [Auto]; [Gen1]; [Gen2]. 

PCI Slot   

Use this item to control PCI slot. 
The optional settings are: [Disabled]; [Enabled]. 

M2M Slot   

Use this item to enable or disable M2E slot function.   
The optional settings are: [Disabled]; [Enabled]. 

M2E Slot 

Use this item to enable or disable M2E slot function.   
The optional settings are: [Disabled]; [Enabled]. 

System after G3 

Use this item to specify what state to go to when power re-applied after a power 
failure (G3 state).   
The optional settings are: [Always On]; [Always Off]; [Former State]. 

3-9 Security Menu 

 

Security menu  allow users to change administrator password and user password 
settings. 

Administrator Password 

If there is no password present on system, please press  [Enter]  to  create new 
administrator password. If password is present on system, please press  [Enter]  to 
verify old password then to clear/change password. Press again to confirm the new 
administrator password. 

User Password 

If there is no password present on system, please press  [Enter]  to  create new 
administrator password. If password is present on system, please press  [Enter]  to 
verify old password then to clear/change password. Press again to confirm the new 
administrator password. 

Содержание NAF791 Series











































Отзывы:

Нет отзывов