33
Use this item to set CPUFAN full speed temperature. Fan will run at full speed
when above this pre-set temperature.
CPUFAN Full-Speed Duty
Use this item to set CPUFAN full-speed duty. Fan will run at full speed when
above this pre-set duty.
CPUFAN Idle-Speed Temperature
Use this item to set CPUFAN idle speed temperature. Fan will run at idle speed
when below this pre-set temperature.
CPUFAN Idle-Speed Duty
Use this item to set CPUFAN idle speed duty. Fan will run at idle speed when
below this pre-set duty.
USB Configuration
Press [Enter] to make settings for the following sub-items:
XHCI Hand-off
this is a workaround for OSes without XHCI hand-off support. The XHCI
ownership change should be claimed by XHCI driver.
The optional settings: [Disabled]; [Enabled]
USB Mass Storage Driver Support
Use this item to enable/disable USB Mass storage Driver Support
The optional settings: [Disabled]; [Enabled]
USB Hardware Delays and Time-outs
USB Transfer Time-out
The time-out value for Control bulk and interrupt transfers
The optional settings: [1 sec]; [5 sec] ; [10 sec] ; [20 sec]
Device Reset Time-out
Use this item to USB mass storage device start unit command time-out
The optional settings: [10 sec]; [20 sec] ; [30 sec] ; [40 sec]
Device Power-up Delay
Use this item to set maximum time the device will take before it properly reports
itself to the host controller.
The optional settings: [Auto]; [Manual].
