34
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.]
WatchDog Wake-up Timer
Support WDT Wake-up.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
User can set a value in the range of [10] to [4095] seconds, or [1] to [4095]
minutes.
WatchDog Wake-up Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select
‘AT or ATX Mode’
on MB jumper at first (refer to
JATX_AT1
jumper setting Pin 1&2 of for ATX Mode & Pin 2&3 of AT Mode
Select).
Serial Port Console Redirection
Press [Enter] to make settings for the following sub-items:
COM1
Console Redirection
Use this item to enable or disable Console Redirection.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled
], user can make further settings in the ‘
Console
Redirection Settings
’ screen:
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items
：
Terminal Type
The optional settings: [VT100]; [VT100Plus]; [VT-UTF8]; [ANSI].
[ANSI]:
Extended ASCII char set;
