29
Boot Performance Mode
Use this item to select the performance state that the BIOS will set starting from
reset vector.
The optional settings: [Max Battery]; [Max Non-Turbo Performance]; [Turbo
Performance]
Intel(R) SpeedStep(tm)
This item allows more than two frequency ranges to be supported.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, the following sub-items shall appear:
Turbo Mode
Use this item to enable or disable processor Turbo Mode (requires EMTTM
enabled too). AUTO means enable.
The optional settings: [Disabled]; [Enabled].
C states
Use this item to enable or disable CPU Power Management. When set as
[Enabled], it allows CPU
to go to C states when it’s not 100% utilized.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, the following sub-items shall appear:
Enhanced C-states
Use this item to enable or disable C1E. When set as [Enable], CPU will switch to
minimum speed when all cores enter C-State.
The optional settings: [Disabled]; [Enabled].
Package C State Limit
Use this item to set maximum package C State limit. When set as [CPU default], it
leaves to Factory default value. When set as [Auto], it initializes to deepest
available package C State Limit.
The optional settings: [C0/C1]; [C2]; [C3]; [C6]; [C7]; [C7S]; [C8]; [C9]; [C10];
[CPU Default]; [Auto].
Power Limit1 Override
Use this item to enable/disable Power Limit1 override. If this option is disabled,
BIOS will program the default values for Power Limit1 and Power Limit1 time
