Web Management User Guide
15
In this page, the status of all ports can be monitored and adjusted for optimum configuration.
Enable:
Enable or disable the port’s connection
Auto-Nege:
Enable or disable port auto-NDI/MDIX
Speed:
Copper connections can operate in Forced Mode settings (1000M Full, 100M Full, 100M
Halt, 10M Full, 10M Half), Auto, or Disabled. The default setting for all ports is
Auto.
Duplex:
Copper connections can operate in Full-Duplex or Half-Duplex Mode
Symmetric Pause:
Asymmetric Pause:
Backpressure:
Addr. Learning:
Enable or disable port learning MAC address.
Port Management -> Port Mirroring
Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming
and/or outgoing packet from one port of the Switch to another port where the packet can be
studied. This enables network managers to better monitor network performances.
Содержание JRL116M-2F-M
