25
Use this item to enable or disable serial port.
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], users can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=3E8h; IRQ=11]; [IO=2E8h; IRQ=11]; [IO=3E0h; IRQ=11];
[IO=2E0h; IRQ=11].
Serial Port FIFO Mode
Use this item to select Serial Port FIFO Mode.
The optional settings are: [16-Byte FIFO]; [32-Byte FIFO]; [64-Byte FIFO]; [128-Byte FIFO].
Parallel Port Configuration
Press [Enter] to make settings for the following items:
Parallel Port Configuration
Parallel Port
Use this item to enable or disable parallel port (LPT/LPTE).
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], users can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [Auto]; [IO=378h; IRQ=7]; [IO=378h; IRQ=5, 6, 7, 10, 11, 12]; [IO=278h;
IRQ=5, 6, 7, 10, 11, 12]; [IO=3BCh; IRQ=5, 6, 7, 10, 11, 12].
Device Mode
Use this item to select the Printer Port mode.
The optional settings are: [STD Printer Mode]; [SPP Mode]; [EPP-1.9 and SPP Mode]; [EPP-1.7
and SPP Mode]; [ECP Mode]; [ECP and EPP 1.9 Mode]; [ECP and EPP 1.7 Mode].
WatchDog Timer
Use this item to enable or disable WatchDog Timer Control. When set as [Enabled], the following
sub-items shall appear:
WatchDog Timer Value
User can set a value in the range of [4] to [255].
WatchDog Timer Unit
The optional settings are: [Second]; [Minute].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power supply. Use
needs to select
‘AT or ATX Mode’ on MB jumper at first (refer to
Page 8
AT_Mode block Pin 1-2 of
ATX Mode & Pin 2-3 of AT Mode Select).
PC Health Status
Press [Enter] to view hardware health status.
Shutdown Temperature
Shutdown Temperature
Use this item to set shutdown temperature
The optional settings: [Disabled]; [70
°C
/156
°F
]; [75
°C
/164
°F
]; [80
°C
/172
°F
]; [85
°C
/180
°F
]; [90
°
C
/188
°F
].
SmartFan Configuration
SmartFan Configuration
CPUFAN SmartFan Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN Full-Speed Temperature
Use this item to set CPUFAN full speed temperature. Fan will run at full speed when above this
