34
*
Note
:
In the case that user needs to update Me firmware, user should set
‘Me
FW Image Re-Flash
’ as [
Enabled
], save the settings and exit. The system will
turn off and reboot after 4 seconds. If the user goes to BIOS screen again will find
this item is set again as [
Disabled
], but user can still re-flash to update firmware
next time.
Trusted Computing
Press [Enter] to view current status information, or make further settings in the
following sub-items:
TPM20 Device Found
Security Device Support
Use this item to enable or disable BIOS support for security device. O.S. will not
show Security Device. TCG EFI protocol and INT1A interface will not be available.
The optional settings: [Disabled]; [Enabled].
When set as
[Enabled]
, user can make further settings in the following items:
Pending operation
Use this item to schedule an Operation for the Security Device.
*
Note
:
Your Computer will reboot during restart in order to change State of
Security Device.
The optional settings: [None]; [TPM Clear].
TPM2.0 UEFI Spec Version
Use this item to select the TCG2 Spec Version Support.
The optional settings: [TCG_1_2]; [TCG_2].
ACPI Settings
Press [Enter] to make settings for the following sub-items:
ACPI Settings
ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.
The optional settings: [Suspend Disabled]; [S3 (Suspend to RAM)].
Wake-up Function Settings
