JETWAY JMTX-ADN1 Series Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 58

JETWAY JMTX-ADN1 Series Скачать руководство пользователя страница 45

40

above this pre-set duty.

CPUFAN1 Idle-Speed Temperature

Use this item to set CPUFAN1 idle speed temperature. Fan will run at idle speed

when below this pre-set temperature.

CPUFAN1 Idle-Speed Duty

Use this item to set CPUFAN1 idle speed duty. Fan will run at idle speed when

below this pre-set duty

SYSFAN1 Smart Mode

The optional settings are: [Disabled]; [Enabled].

When set as [Enabled], the following sub-items shall appear:

SYSFAN1 Full-Speed Temperature

Use this item to set SYSFAN1 full speed temperature. Fan will run at full speed

when above this pre-set temperature.

SYSFAN1 Full-Speed Duty

Use this item to set SYSFAN1 full-speed duty. Fan will run at full speed when

above this pre-set duty.

SYSFAN1 Idle-Speed Temperature

Use this item to set SYSFAN1 idle speed temperature. Fan will run at idle speed

when below this pre-set temperature.

SYSFAN1 Idle-Speed Duty

Use this item to set SYSFAN1 idle speed duty. Fan will run at idle speed when

below this pre-set duty



Serial Port Console Redirection

COM1

Console Redirection

The optional settings: [Disabled]; [Enabled].

When set as [Enabled], the following sub-items shall appear:



Console Redirection Settings

The settings specify how the host computer and the remote computer (which

the user is using) will exchange data. Both computers should have the same or

«
...
43
44
45
46
47
...
»

Содержание JMTX-ADN1 Series



























































Отзывы:

Нет отзывов