16
6.
Plug this side of the cable to SATA
power-in connector and SATA connector
of the hard disk.
7.
Lock the racks with SATA HDD installed
to its original places by tightening the
screws in the marked spots.
8.
Plug the other sides of the cables into the SATA power connector and SATA port
connector on the board.
Notice:
When all necessary installations are finished, please make sure that all cables unplugged before
installations are connected to their original places before restoring the back cover to the chassis and
screws on the front panel/back panel/top cover locked to its original places (Refer to Part I). See to it that
the cables inside are not blocked or pressed.
