JETWAY J-791A, Руководство пользователя

Страница: 9 / 37

8
2-3-2 System Memory (DRAM)
This motherboard support tree168-pin DIMM Module, using +3V unbuffer synchronous DRAM
in either EDO or SDRAM with Max. memory size of 768MB.
DIMM1 DIMM2 DIMM3
Total Memory
Combination
16MB none none 16MB
16MB 16MB none 32MB
16MB 16MB 16MB 48MB
32MB none none 32MB
32MB 32MB none 64MB
32MB 32MB 32MB 96MB
64MB none none 64MB
64MB 64MB none 128MB
64MB 64MB 64MB 192MB
128MB none none 128MB
128MB 128MB none 256MB
128MB 128MB 128MB 384MB
256MB none none 256MB
256MB 256MB none 512MB
256MB 256MB 256MB 768MB
2-4 Central Processing Unit (CPU)
The motherboard provides a Slot-1 for Pentium II processor. The CPU on board must have a
fan or heat sink attached to prevent overheating.
WARNING: Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU
and the motherboard.
To install a CPU, first turn off your system and remove its cover. Locate the Slot- 1 and place
RETENTION MODULE as following:
IMPORTANT: You must setswitch U4,U2 for both “CPU to Bus frequency Ratio” and “Bus
Frequency Selection” on page 7 depending on the CPU that you install.
➀
Attach heat sink to the CPU.
➁
Place Part A on slot-1 and gently screw four corners on top of the mother-board.